Verizon MI424-WR User Manual page 120

6
Configuring Security Settings
6.10 Security Log
• Advanced Filter Rule
advanced filter rule.
ARP
• - an ARP packet has been accepted.
• AUTH:113 request
accepted (for maximum security level).
Broadcast/Multicast protection
•
source IP has been blocked.
• Connection closed -
Connection opened
•
• Default policy - a packet has been accepted/blocked according to the
default policy.
Defragmentation failed
•
blocked until all fragments have arrived and defragmentation can be
performed.
• DHCP relay agent - a DHCP relay packet has been received (depends on
the distribution)
DHCP request - the FiOS Router sent a DHCP request (depends on
•
the distribution)
• DHCP response - the FiOS Router received a DHCP response (depends on
the distribution)
DMZ network packet - a packet from a demilitarized zone network has
•
been blocked.
Echo/Chargen/Quote/Snork protection
•
Echo/Chargen/Quote/Snork protection.
• Error: No memory
lack of memory.
Firewall internal
•
type is recorded, an accompanying explanation will be added.
© 2010 Verizon. All Rights Reserved.
- a packet has been accepted/blocked because of an
- an outbound packet for AUTH protocol has been
- a packet with a broadcast/multicast
debug message regarding connection.
- debug message regarding connection.
- the fragment has been stored in memory and
- a new connection has not been established because of
- from the firewall internal mechanism, in case this event-
120
- a packet has been blocked due to