Verizon MI424-WR User Manual page 192

A
Configuring Quality of Service
A.1 Traffic Priority
2.
After choosing the traffic direction and the device on which to set the rule,
click Add in the appropriate row. The "Add Traffic Priority Rule"
screen appears.
Set the following parameters:
Source Address
The source address of the packets sent to or received from the network object.
To add an address:
1. Select " User Defined" from the drop-down list. The screen refreshes and an
"Add" link appears.
2. Add, then add a new network object (see the "Advanced Settings"
Click
chapter to learn how to add a network object). Clicking Add is the same as
clicking New Entry in the Network Objects screen.
Destination Address
The destination address of the packets sent to or received from the network
object. This address can be configured in the same manner as the source address.
© 2010 Verizon. All Rights Reserved.
192