Unpacking - REVELL Performa S30 Manual

Hide thumbs Also See for Performa S30:
Table of Contents

Advertisement

UNPACKING

To avoid injury, please use care during unpacking. Always
stand as straight as possible and use your leg muscles to lift the
REVEL PERFORMA S30 loudspeakers. Do not lift it while
bending from the waist.
To unpack a pair of REVEL PERFORMA S30 loudspeakers, per-
form the following steps:
1. Place the carton onto its top and open the bottom flaps.
2. Turn the carton over and open the top flaps.
3. Lift the carton off the loudspeakers and set it aside, being
careful not to damage the contents (see Figure 3).
Warranty Card,
Owner's Manual,
Top Pad
and Mounting Kit
Bottom Pad
4. Remove the mounting kit and set it aside.
5. Remove the top and bottom pads and the protective bags. Use
caution to avoid scraping finishes or pulling off the grilles.
After unpacking, carefully inspect each loudspeaker for possible
damage due to shipping. If you discover any damage, immediately
contact your Revel dealer for further assistance. When moving a
REVEL PERFORMA S30 loudspeaker (e.g., when experimenting
with placement), avoid touching the transducers.
Keep all packing materials for future shipping. In the unlikely
event a product will need repair, Revel will only accept a unit in its
original shipping carton. Using any other packing materials may
result in damage to the product and is not covered by the warranty.
See Obtaining Service on page 21 for additional details.
REVEL PERFORMA S30
6
Owner's Manual
+ 1
0
-1
c y
e n
u
q
)
re
B
i F
(d
H
e l
ev
L
WARNING
Figure 3. REVEL PERFORMA
S30 loudspeakers with their
inner packing materials.

Advertisement

Table of Contents
loading

Table of Contents