Table of Contents
Advertisement
SYSTEM OPTIMIZATION (Cont'd)
3. Turn on the system power and play a variety of material. Slowly
increase the volume to a comfortable level and listen from your
main listening position. Be sure to set your multi-channel con-
troller to a mode that utilizes the surround channels.
4. You may also wish to further adjust the tweeter's HIGH FRE-
QUENCY LEVEL control (see Figure 16 on the previous page)
to achieve the most natural sound in your room. Varying the
control will change the high-frequency balance and timbre.
CABINET CARE
The cabinet for the REVEL PERFORMA S30 surround
loudspeaker has a painted finish and does not require any
routine maintenance.
Occasionally use a soft cloth, dampened with water, to remove any
fingerprints or dust. Clean the grilles by gentle vacuuming.
LOUDSPEAKERS AND POWER
A REVEL PERFORMA S30 surround loudspeaker uses high-order
crossovers with steep cut-offs to eliminate damage caused by "out
of band" frequencies. Using this approach, in combination with
carefully selected components and transducers, gives us confidence
that a REVEL PERFORMA S30 loudspeaker will not fail, even
under extreme conditions.
However, there is a limit to how loud any speaker can play
continuously. A good rule of thumb is to avoid playing the system
at volume levels beyond where the sound is "clear." If the sound
becomes distorted or strained, reduce the volume level immediately
to avoid damage.
If you are unsure of the suitability of current or planned
amplifier components, please ask your Revel dealer to review
them before connecting your REVEL PERFORMA S30
surround loudspeakers.
REVEL PERFORMA S30
20
Owner's Manual
Advertisement
Table of Contents
