Page 2
THX is a trademark of THX Ltd., which may be registered in some jurisdictions. All rights reserved. "DTS" is a trademark of Digital Theater Systems, Inc. “Revel,” “Concerta,” the Revel logo, and “Controlled Acoustic Impedance” are registered trademarks of Harman International Industries. U.S. patent numbers and other world- wide patents issued and pending.
DOCUMENTATION CONVENTIONS This document contains general safety, installation, and operation instructions for the Revel Concerta S12 Surround-Effects Loudspeaker. It is important to read this document before attempting to use this prod- uct. Pay particular attention to safety instructions. WARNING Calls attention to a procedure, practice, condition, or the like that, if not correctly performed or adhered to, could result in injury or death.
Since 1996, Revel has stood at the forefront of loudspeaker design and performance. Backed by Harman International’s exten- sive research and design facilities, the Revel Concerta Series Loudspeakers benefit from cutting-edge development tools.
Finite element analysis allows for advanced loudspeaker modeling. A stereo lithography apparatus provides tight toler- ances. Adding to the proud lineage of Revel’s Ultima and Performa Series Loudspeakers, the S12 solidifies Revel’s reputation as the leading designer and manufacturer of high-quality, high-performance loudspeak- ers.
Page 7
S12 in the upright position. 6. When the S12 is in the upright posi- tion, remove the Owner’s Manual, Warranty Card and feet. 7. Remove the top pad and microfoam sheet. Bottom Figure 2: Packing Materials REVEL Concerta S12 Owner’s Manual...
Select the Bipole mode as shown in Figure 4 (right) for most home the- ater installations. REVEL Concerta S12 Owner’s Manual Figure 4: Bipole Mode Bipole Toggled to Bipole Select the Bipole mode when the S12 is configured as two independ- ent loudspeakers.
Loudspeaker fidelity depends on the following three factors: 1. Loudspeaker accuracy 2. Loudspeaker placement 3. Loudspeaker mode configuration Advanced Revel design features allow the S12 to achieve exceptional acoustical precision. Proper loudspeaker placement and experimentation with the Surround Mode Configuration control will have the most significant impact on the loudspeak- er’s performance.
Page 11
Set to Monopole to compensate for less than ideal placement, such as if the S12 is mounted in the corner of the listening room, or mounted less than three feet from the ceiling. REVEL Concerta S12 Owner’s Manual Subwoofer (optional) 5˚...
Page 12
Figure 9: Monopole Mode for Side Channels in a 5-, 6- or 7-Channel System REVEL Concerta S12 Owner’s Manual Note The set of drivers to the right of the Monopole setting indicator should be...
Page 13
(Couch) Rear Channel(s) The bulleted items that begin below indi- cate important S12 placement considera- tions for use as a rear speaker in 6- or 7- channel installations. • If you are using a single S12 as a rear speaker, it should be mounted up-right...
Page 14
80Hz and 120Hz. Consult your receiver/processor owner’s manual for more information about these adjustments. REVEL Concerta S12 Owner’s Manual Dual Rear Discrete Channels The S12 possesses the unique ability to function as two distinct loudspeakers housed in one enclosure.
3. Drive wood screws into the wall using the markings placed in step 2 as a guide. Leave a 3/16-inch (5mm) space between the wall and screwhead. REVEL Concerta S12 Owner’s Manual 2-7/16" (62mm) 11.75" (298.5mm)
• If you have questions about the suit- ability of associated power amplifier com- ponents, contact an authorized Revel dealer for information. • Use high-quality loudspeaker cable with a maximum total loop resistance of 0.07ohms or less (for each wire run).
Page 17
S12 used as discrete rear channels Left Rear Speaker Amplifier Left Rear For Dual-Mode discrete rear channels, the S12 should be placed in the center of the rear wall. Right Rear Speaker REVEL Concerta S12 Owner’s Manual Right Rear...
Page 18
Bipole for proper operation. CAUTION Failure to remove the shorting-straps may damage the associated power amplifier. REVEL Concerta S12 Owner’s Manual Figure 19: Dual-Speaker Mode Connection for a single S12 used as discrete side and rear channels Right Wall...
To avoid damage, reduce volume level immediately if loudspeaker sound is not clean and clear. OBTAINING SERVICE To obtain warranty or non-warranty serv- ice, contact your authorized Revel dealer. Refer to the included Revel Warranty Card for warranty information. REVEL Concerta S12 Owner’s Manual...