Adjusting the Console
Selecting the Ringing Output
You can route the ringing that accompanies an incoming call to the
handset/headset instead of the console speaker.
To select the ringing output:
1. Press Cancel while holding down the Function key.
2. Press the [F3> softkey to toggle the output.
3. Press the [F2> softkey to save the change and exit the menu.
Note: Emergency 911 calls always ring through the console speaker,
regardless of the Ringing Output setting.
Turning the New Call Ring Off/On
The New Call Ring is a single burst of ringing that can signal the arrival of
a second call while the first call is in progress. If the New Call Ring is off,
the only way to know that calls are waiting is by the C/W indicator on the
console display.
To turn the New Call Ring off/on:
1. Press Cancel while holding down the Function key.
2. Press the [F4> softkey to turn New Call Ring off or on.
3. Press the [F2> softkey to save the change and exit the menu.
Notes:
1. With the ringing output routed to the handset/headset, the New Call
Ring will momentarily interrupt the voice of the first caller.
2. Emergency 911 calls always ring regardless of the New Call Ring
setting.
Getting Started
15