Setting/Canceling Wake-up Calls
Both you and the guest can set, change, and cancel wake-up calls for a
guest room. The system does not distinguish whether a wake-up call is set,
changed, or canceled from the attendant console or guest room telephone.
So, for example, a guest can cancel a wake-up call that you set and vice
You can set or cancel a wake-up call while the console is idle or while
connected to the guest room.
If a printer is attached to the console, a report may print each time you set,
change, or cancel a wake-up call.
To set or cancel a wake-up time while connected to the guest room:
1. Press [S
2. Enter the time using four digits (hh:mm).
For example, for 6:30 enter 0630.
3. Do one of the following:
• Press [S
• Press [P
] to set the time as PM. ([P
clock is set to 12-hour format, and the hour entered is in the range
01 – 12.)
To set or change a wake-up time when NOT connected to the guest
1. Press Function.
2. Press [G
3. Dial the room number.
4. Follow steps 1-3 from the previous procedure.
] to set the time as AM.
] only appears if the system