Viewing 911 Call Alarms - Mitel SUPERCONSOLE 1000 SX-200 User Manual

SUPERCONSOLE 1000

Viewing 911 Call Alarms

This feature raises an alarm at the console when an extension user places
a 911 (or other designated Emergency Services number) call and
identifies the extension that placed the call. With this information, you can
direct emergency services (for example, police or ambulance personnel)
to the location from which the call was placed.
When a 911 Call alarm is raised, the console rings and the display shows
"911 Call <Press Function Key for Details> ALARM".
Note: Although the console alarm indicates the calling extension's
location, the emergency could be somewhere else—for example, in
another room or on a different floor. Therefore, it is important to get verbal
confirmation from the caller about where help is needed.
To read a 911 Emergency Call alarm message:
1. Press Function.
2. Press [A
LARM
3. Press [S
HOW
The display shows:
4. Record the number of the extension from which the 911 call originated.
If additional 911 calls were made, press [M
To delete the 911 alarm, press [C
5. Contact the appropriate emergency services.
6. Press [E ].
XIT
If an attendant console is in Attendant Console Lockout state, you can still
access 911 alarm information, but you cannot clear the alarms.
46
User Guide
®
].
911].
] to view them.
ORE
].
LEAR