A&D AD-4410 Instruction Manual page 36

Function No.
Parameter or
Setting range
Calf08
0. 0 9. 9
to
Calf09
0 9
to
Weight
value
STABLE
signal
Calf10
0 1
to
Calf11
0 1
to
Calf12
0 1
to
AD-4410
Function
Performs stability detection using this setting
in combination with the setting of the stability
Stability
detection band.
detection
time
Performs stability detection using this setting
in combination with the setting of the stability
Stability
detection time.
detection
band
Stability detection outputs the STABLE signal when changes in
the weight value are within a certain range during a certain time.
CALF09
CALF08
Tare and
Tare and zero adjustment when the weight
zero
value is unstable.
adjustment
when
unstable
Tare when
Tare when the gross weight is negative.
the gross
weight is
negative
Output
Standard serial output when the weight value
when
overflows and is unstable.
overflow
and
unstable
Description
When 0.0, stability detection will not be
performed. (Stable all the time)
Unit: second in 0.1 increments
When 0, stability detection will not be
performed. (Stable all the time)
Unit: d (minimum division)
0: Disables both functions.
1: Enables both functions.
0: Disables tare.
1: Enables tare.
0: Disables output.
1: Enables output.
Page 34
CALF08
Default
value
1. 0
2
CALF09
1
1
1