System Connections - Sharp DK-AP2 Operation Manual

Music system for ipod
Hide thumbs Also See for DK-AP2:
Table of Contents

Advertisement

System connections

DK-AP2
DK-AP2(BK)
Make sure to unplug the AC power lead before any connections.
Connecting iPod to TV
iPod photo and 5th Generation iPod with photo and video can be
viewed by connecting to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket at the side of the unit and set the TV Out on the iPod unit to
"On" position.
VIDEO
OUT
DC IN 6V
AUX IN
Using with the AC/DC adaptor
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC INPUT socket on
the unit.
3
Plug the AC power lead into a wall socket and switch on the
power supply. The STAND-BY indicator turns red and when
the power is on, the POWER indicator turns blue.
6
To video
input socket
Video cable
(not supplied)
AC/DC Adaptor Cable
DC INPUT Socket
AC Power Lead
TV
3
(AC 110 - 240 V, 50/60 Hz)
Notes:
Unplug the AC/DC adaptor from the wall socket if the unit will not
be used for a prolonged period of time.
Connecting the AC/DC adaptor to the unit disconnects the
batteries.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
2
VIDEO
OUT
DC IN 6V
AUX IN
(DC 6V)
1
VIDEO
OUT
DC IN 6V
AUX IN
AC/DC Adaptor
Wall Socket

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dk-ap2bk

Table of Contents