Make sure to unplug the AC/DC adaptor before making
Connecting iPod to TV
Photo and video files from iPod can be viewed by connecting the
system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket at the back of the unit and set the TV Out on the iPod unit to
Watching videos on a TV connected
Enter the iPod menu.
Press the E
(-TV OUT) button until the E
LED blinks twice to display video on the TV screen.
Select the desired video from the iPod unit.
button on the iPod unit to start
For iPod touch, playback will automatically start once the
desired video is selected.
If the TV Out setting is already turned ON at video menu, the
video is automatically displayed on the TV screen when iPod
To return to watching video on iPod screen, repeat steps 1 to 3.
During iPod video playback, pressing the E
button until the E
LED blinks twice will not toggle video out
display between iPod and TV.
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple's home page for further
Customer should also refer iPod operation manual before
making video out setting.
Using with the AC/DC adaptor
Plug the AC/DC adaptor cable into the DC IN socket on
Plug the AC/DC adaptor into a wall socket.
Unplug the AC/DC adaptor from the wall socket if the unit will
not be used for a prolonged period of time.
Connecting the AC/DC adaptor to the unit disconnects the
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
DC IN socket
(AC 100 - 240 V, 50/60 Hz)