Siemens SICLOCK TC 400 Operating Instructions Manual page 99

Table 10-1 List of the parameters of SICLOCK TC 400
1)
Access Parameter
/ No.
Hardware Version
0.08.03
1) The access symbols display the access possibility at the highest authorization level.
Note
If the configuration tool is not authorized or operated with a low authorization level,
then not all parameters are displayed. This restriction affects, for example, set-
tings under "System".
The access rights also change with the authorization level.
Further information
List of Symbols (Section C)
Authorization (Section 7.2.2)
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400
Entry
A2B number
release number
serial number
Parameter Table
Value Range / Default
Min: 0
Max: 4294967295
Default: 0
Min: 0
Max: 65535
Default: 0
10-97