Establish/Disconnect Online Connection - Siemens SICLOCK TC 400 Operating Instructions Manual

Table 7-2 Operator options and displays in the toolbar of the configuration tool
Field/Button
Acknowledge all events
Ignore event
7.2.1

Establish/disconnect online connection

To establish an online connection to the SICLOCK TC 400:
1. Enter the IP address of the device in the toolbar.
2. Start the connection build-up by clicking the
field.
−> The configuration tool changes to online mode:
To disconnect the online connection to the SICLOCK TC 400:
1. Click the
−> The configuration tool changes to offline mode:
Note
The device is disconnected if there have not been any operator actions for approx.
two hours
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400
Acknowledge all pending events
In online mode, an acknowledgement for all pending events is sent to the
device. There is an acknowledgement even when the cause of the event is
still present. In this way it is possible, for example, to clear persistent
alarms.
Discard the pending event
The event display is cleared without interaction with the device.
icon next to the IP address field.
Meaning/Instruction
icon next to the IP address
Configuration Tool
7-51