Parameter Table - Siemens SICLOCK TC 400 Operating Instructions Manual

Parameter Table

Table 10-1 List of the parameters of SICLOCK TC 400
1)
Access Parameter
/ No.
Time
Local Time
0.09.04
UTC Time
0.09.02
Time Zone
0.09.06
Time/Advanced
Daylight Saving Time
0.09.07
Definite Daylight Saving
Time
0.09.08
Leap Seconds[20]
0.09.05
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400
Entry
time and date
time and date
offset from UTC to zone time
enable
time when changing over from
standard time to daylight sav-
ing time
time when changing back from
daylight saving time to stan-
dard time
hours
definite time and date when
changing back from daylight
saving time to standard time
definite time and date when
changing over from standard
time to daylight saving time
time and date
size
Value Range / Default
Min: UTC-12:00 h
Max: UTC+14:00 h
Default: UTC+01:00 h
Min: Yes
Max: No
Default: Yes
Min: February, third Sunday, 00:00
Max: apply a definite date and time
Default: March, last Sunday, 02:00
Min: February, third Sunday, 00:00
Max: apply a definite date and time
Default: October, last Sunday, 03:00
Min: +1 h
Max: +2 h
Default: +1 h
Min: -1 s
Max: +1 s
Default: +0 s
10
10-87