Certificates And Approvals - Siemens SICLOCK TC 400 Operating Instructions Manual

Appendix
A.2

Certificates and approvals

DIN ISO 9001 certificate
The quality assurance system for the entire product process (development, pro-
duction, and marketing) at Siemens fulfills the requirements of DIN EN ISO 9001.
This has been certified by DQS (the German society for the certification of quality
management systems).
Note
The approval or approbation is located on the type plate.
EMC
Table A-2
USA
General
Shielded Cables
Modifications
Canadian Notice
A-116
EMC Directives USA
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1 This device may not cause harmful interferences.
2 This device must accept any interference received, including inter-
ference that may cause undesired operation.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices. Failure
to do so may violate FCC rules.
Siemens AG is not responsible for any radio television interference
caused by unauthorized modifications of this equipment or the sub-
stitution or attachment of connecting cables and equipment other
than those specified by Siemens AG. The correction of interference
caused by such unauthorized modification, substitution or attach-
ment will be the responsibility of the user.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme
NMB-003 du Canada.
© Siemens AG 2007 All Rights Reserved
SICLOCK
®
TC 400