Getting started
Connecting the base
1.
jack: Insert ISDN connection cable until connector clicks into place.
-S
0
2. Insert ISDN connection cable into ISDN connection until connector clicks into place.
3. For NTBA with self-mounting, plug in the cable between the NTBA and the TAE (old
telephone outlet) or Mini-Western connector until both connectors click into place.
4.
jack: Plug in the power supply cord, until the connector clicks into place and plug
into the mains outlet.
Use only the power unit supplied, as indicated on the underside of the
!
base station.
Power failure:
Your base and the handsets registered on it, as well as wire-based termi-
i
nals cannot operate in case of power failure. However, all the settings
and stored information (messages, phonebook entries etc.) are retained
indefinitely.
6
5.
1.
4.
3.
2.
Schematic illustration
Front of unit