Siemens GIGASET SX205 ISDN Manual page 11

Getting started
Manually registering a Gigaset S1 / SL1 handset
v
s
Settings
s
Register H/Set
s
Base 1
~
OK
s
Int.11
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
Manually registering a Gigaset C1 / C2 handset
MENU
s
Handset Settings
s
Register Handset
s
Base 1
~
OK
s
Int.11
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
10
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e. g. Base 1.
OK
Enter the system PIN of the base (factory setting:
0000) and confirm. In the display are Regstr.Proce-
dure and the name of the base, e. g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
Select internal number and confirm, e. g. Int.11 .
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e. g. Base 1.
OK
Enter the system PIN of the base (factory setting:
0000) and confirm. In the display are Registering
and the name of the base, e. g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
Select internal number and confirm, e. g. Int.11 .
OK