Registering Handsets - Siemens GIGASET SX205 ISDN Manual

Example: "Assigning an MSN a ringer melody"
MENU
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Set up MSN
s
MENU
s
Ringer Melody: 5

Registering handsets

You can register a maximum of eight wireless devices on your base (including
Gigaset data modules (page 30) and Gigaset Repeater (page 30)). The internal num-
bers 11-18 are set aside for this purpose. Wire-based analogue devices do not have to
be registered (page 26).
If the internal numbers Int.11 to Int.18 on your telephone have already been assigned,
please de-register another handset you no longer require before registering a new one
(see handset operating instructions).
If necessary, keep the handset operating instructions to hand with their description of
the registration process.
You must initiate handset registration on the handset and on the base.
1. On the base
Press the registration/paging key on the base for about 3 seconds. This starts the regis-
tration. The base is ready for registering for 30 seconds.
2. On the handset (within 30 sec.)
Register your handset (see handset operating instructions).
If the handset cancels base paging, e. g. because the registration time has
i
been exceeded, repeat the process.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 10).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select MSN, e.g. MSN1: Anna.
Open the submenu.
Select melody and confirm, e.g. Ringer Melody: 5
OK
‰
( = set).
Press the lit Registration/Paging key
Getting started
9