Remote Control Of Answering Machines - Siemens GIGASET SX205 ISDN Manual

Answering Machine

Remote control of answering machines

With the remote control option, you can operate your answering machine, e.g. listen to
and delete messages
from a registered handset, a connected cord telephone or
N
from external telephones and handsets.
N
Apart from the first step, the procedure is the same for both kinds of remote control.
The following functions are available when using remote control:
Activating/deactivating the answering machine
N
Messages and memos
N
– Play
– Skip
– Delete
Announcement
N
– Record
– Play
– Select
Recording internal memos
N
Help
N
Precondition:
For external operation, you must change the answering machine PIN for your
N
own security (factory setting: 0000).
In order to be able to use the full range of functions of this mode, you must enable
N
"Remote control" and "Remote delete" on the base (see handset operating instruc-
tions).
Starting remote control
Operating the answering machine while you are away from home
For remote control you need a telephone that transmits DTMF tones (tone dialling). It is
important to enter the AM PIN immediately while the announcement is being played. In
addition
Remote control
~
~
Operating the answering machine from the handset (internal)
There is a voice-controlled help for the two-key functions;
0 ;
: ;
F ;
9 ;
22
and, if required,
Remote delete
Dial your own telephone number.
When the announcement starts, enter the AM PIN at
once.
Help with deleting
Help with new messages/phrases
Help with recording
Help with modes
must be activated.