Appendix; Care; Contact With Liquid; Questions And Answers - Siemens GIGASET SX205 ISDN Manual

Telephone base

Hide thumbs

Table Of Contents

Table of Contents

Appendix

Care

Wipe the base and handset with a damp cloth (no solvents) or an antistatic cloth. Never

use a dry cloth. This can cause static discharge.

Contact with liquid

If the handset should come into contact with liquid, on no account switch the device

on. Remove all batteries immediately.

Allow the liquid to drain out of the device, and then pat all parts of the device dry.

Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.

In many cases, you will then be able to use it again.

Questions and Answers

If you have any questions about the use of your phone, you can contact us 24 hours a

day at www.my-siemens.com/customercare. You will find the most frequently asked

questions and the corresponding answers below.

What has happened if ... Possible Cause

... the handset or the base

does not ring?

... the answering machine

says "PIN is incorrect" during

remote control?

... the answering machine

does not record any messages

or has automatically switched

over to 'announce only'?

... there are no incoming

calls?

... the telephone also rings for

fax-PC calls?

The ringer is switched off.

Call forwarding is set to Immedi-

ately.

Night service is active.

The system PIN entered is incor-

rect or still set to 0000.

Its memory is full.

"Constant" call forwarding is acti-

vated.

The MSN has not been assigned

to the internal user.

The "internal" authorisation is

set.

The phone number is in the

phone number list on the base.

Appendix

Possible solution

Activate the ringer for the

handset or the base.

Switch off call forwarding.

Deactivate night service.