Siemens GIGASET SX205 ISDN Manual page 14

Registering a Gigaset 2000 C handset
h
.
s
Settings
s
Registration
s
Station 1
Í
s
Registration
~
OK
s
Int.11
Registering a Gigaset 2000S / Gigaset 1000 C/S handset
For the registration procedure described below:
You can register a maximum of four other handsets (e. g. Gigaset 2000S, GAP handsets)
or wireless devices (e. g. Gigaset 1000 TAE, STA). Register these devices first.
Registering a Gigaset 2000S handset
h
o h
o
The lowest free internal number is assigned. It is not possible to select a free internal
number.
Registering a Gigaset 1000 C/S handset
For the registration procedures, please refer to the corresponding operating instruc-
tions.
Press to turn on the handset.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1-4) and confirm.
OK
Open the submenu.
Select the menu item and confirm.
OK
Enter the system PIN of the base (factory setting:
0000) and confirm.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
Select internal number and confirm, e. g. Int.11 . The
OK
successful registration is confirmed on the display.
h
Press
(off)
Simultaneously press the number of the base station
h
and
(on)
Enter system code.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
.
.
Getting started
13