Table of Contents
Advertisement
Selecting parameters and setting values
On the MR‐2, you can select parameters and set values by pressing the
controller buttons. When you select an item on the screen using a control‐
ler button, the selection icon " " or " " will move to the selected item.
Icon " " indicates that an additional setting screen will appear when you
press the Confirmation button (the center controller button).
To select parameters or set values, you will press the cursor left/right/up/
down (
/
/
/
) buttons to move the selection icon or modify a
value. To confirm a setting, you will press the Confirmation button (the
center controller button). In this manual, this series of operations is called
"select and confirm."
Depending on the parameter, selecting and confirming an item may cause
a further setting screen to appear, or may cause a check mark to appear in
a check box.
If you've made a setting in a further setting screen, you can press the
menu button to return to the previous screen.
Selection icon
Push
Push
Push
6
Advertisement
Table of Contents
