Using The Mr-2 With Your Computer; Usb Mode - Korg mr-2 Owner's Manual

Using the MR-2 with your computer

You can use the MR‐2 as a USB 2.0 mass storage class device.
This lets you copy files from the MR‐2 to your computer, or copy files
(MP2, MP3, WAV, DSDIFF, etc.) from your computer into the MR‐2.
There are limitations on the audio files that the MR‐2 can recognize
(see page 47).

USB mode

In this mode, the MR‐2 will be detected by your computer as an external
disk. The MR‐2 won't operate as a recorder while it is in USB mode.
Entering USB mode
1. Connect the MR‐2 to your computer.
Windows users (Windows 2000 or later)
Use a USB cable to connect the MR‐2's USB connector to your com‐
puter's USB connector. Make sure that the connector is oriented cor‐
rectly, and insert it all the way.
Press the menu button, and from the menu list (MENU) screen, use
the controller buttons to select and confirm "USB MODE."
The MR‐2 will start up in USB mode if the USB cable is con‐
nected when you turn on the power.
Macintosh users (Mac OS X 10.4 or later)
With the MR‐2 powered‐off, connect the USB cable to the Macin‐
tosh. Make sure that the connector is oriented correctly, and insert it
all the way.
When you power‐on the MR‐2, it will automatically enter USB mode.
The USB mode (USB MODE) screen will appear.
While this screen is displayed, you must not disconnect the
USB cable or turn the power of your computer on or off
2. A drive named "Local disk (*:)" (or "Unspecified name") will be
added to your computer.
Push
.
45