Table of Contents
Advertisement
Files inside the DFF_0001 folder (project folder)
Do not use your computer to rename the audio data files inside
this folder. Otherwise, the MR‐2 will no longer recognize the files.
DFF_0001.prj (project settings file)
This is a file specific to the MR‐2, containing information (protect
setting, mark data, etc.) for each recorded project. Only one file with
this extension (.prj) can exist in each project folder.
DFF_0001_001.dff (audio data file: dff)
These are stereo audio data files. The extension (.dff) will depend on
the recording format. When the file is recorded, the file name and
the extension will be as follows.
D F F _ 0 0 0 1 _ 0 0 1 . d f f
Project name
The file is divided (into a maximum of
(This will not
ninety nine files), with this area being
be updated
even if you
and "1", "2" ... etc. if the size is greater
rename.)
than 1 GB. Even if the file size is less
than 1 GB, the file will be divided if
you pause during recording.
MRpm.sys
This file contains settings used by the system. There must be one and
only one such file. Do not move or delete it.
Never delete or rename this file.
LST_0001.m3u
This file contains a play list.
Do not rename this file.
Playback folder
This folder is used to hold audio data that was created on your com‐
puter or another device. You cannot edit these files on the MR‐2, but
you can add them to a play list and play them. You can create up to
four levels within a folder, but the MR‐2 is able to recognize only up to
a total of four hundred folders and files within this folder.
"1" if the file size is 1 GB or less,
Recording
format
extension
MP2----------- .mp2
MP3----------- .mp3
WAV, BWF)-- .wav
DSDIFF------- .dff
DSF----------- .dsf
WSD---------- .wsd
49
Advertisement
Table of Contents
