Removing The Mpwa Connectors; Mpwa Connection And Screw Locations - ENCAD T200+ Service Manual

Removing the MPWA Connectors

Disconnect all 6 connectors on the MPWA so that the MPWA can be
removed (see Figure 5-2 for positions of the connectors), as follows:
CAPTIVE
FASTENER
CAUTION
Do not pull the cables from the connectors on the J3
location (Display Cable) and J6 location (Trailing Cable)
ubtil they are unlocked. Doing so may cause damage to
the cable. Do not pull the lock too hard as you unlock the
connectors or the lock may break off.
STEPPER
MOTOR
SCREW
J3
DISPLAY
ASSEMBLY
SCREW
Figure 5-2. MPWA Connection and Screw Locations.
ENCAD T-200 and T-200+ Service Manual
J6
TRAILING
J10
CABLE
CAPTIVE
FASTENER
J5
J7
VACUUM/
SERVO
COOLING FAN
MOTOR
Assembly\Disassembly
J9
POWER
SUPPLY
SCREW
5-4