Installing The Optional Document Extender; Adjusting The Output Tray - Kodak i5000 series User Manual

Installing the optional
document extender

Adjusting the output tray

3-4
• Insert the ends of the document extender into the holes on the input elevator
and the output tray and lower the extender into position.
Various document handling settings are available to adjust the way that
documents are placed into the output tray (via the TWAIN Datasource, ISIS
Driver or VRS). The highest throughput can be obtained by scanning
documents of similar size using the output tray side guides and end stop with
Normal document handling.
Other document handling options are available for better handling when
scanning documents of varying size and thickness.
• Adjusting the angle of the output tray — it is strongly recommended that
you scan documents with the angle of the output tray in the "up" position to
achieve best stacking performance. Just lift the front of the output tray and
the height adjustment tab will release from underneath the output tray.
To lower the output tray, gently push the height adjustment tab underneath
the output tray while lowering the output tray on to the printer access cover.
A-61670 February 2013