User Counter
Auto Raise
3-24
This option enables a counter that you can control. Once enabled, the counter
goes to 0 and is incremented for every document fed. You can reset this
counter at any time.
If the User Counter is set to On, the option to Show User Counter/Show
Document Counter and Reset User Counter will be available from the Idle
screen.
• If you touch Show User Counter on the Idle screen, the User counter
icon will be displayed in the status area of the Scanning and Idle screens
next to the Counter value.
• If you touch Show Document counter on the Idle screen, the Document
counter
icon will be displayed in the status area of the Scanning and Idle
screens, next to the Counter value.
If the User Counter is set to Off, these options: Show User Counter/Show
Document Counter and Reset User Counter will not be available from the
Idle screen. Only the Document Counter value will be displayed in the status
area of the Scanning and Idle screens.
When this option is enabled, the input elevator will automatically raise to the
feeding position when paper is added to an empty input elevator.
A-61670 February 2013