4-4
3. Open the ink cartridge package and remove the tab from the new ink
cartridge.
4. Push down on the printer carrier tab to rotate the printer carrier up.
5.
Snap the ink cartridge into the printer carrier as shown.
6. Rotate the printer carrier up and snap the ink cartridge in place.
7. Slide the printer carrier into the desired print position. See the section
entitled "Changing print positions" later in this chapter.
8. Close the printer access cover and reinstall the output tray.
9. Run a print test (see the section entitled, "Performing a print test" in
Chapter 3).
A-61670 February 2013