Pausing And Resuming Scanning; Scan Job Overrides - Kodak i5000 series User Manual

Pausing and resuming
scanning

Scan job overrides

A-61670 February 2013
You can manually stop/pause and start/resume the scanner while scanning
documents.
• To temporarily pause scanning, touch the Stop/Pause button on the
scanner once.
• If you want to stop scanning, you can touch Stop on the Operator Control
Panel touchscreen, or press the Stop/Pause button twice.
• Touch the Start/Resume on the scanner to restart scanning after it has
been paused.
NOTE: During scanning the scanner monitors its own internal image buffer
memory. In order to prevent overwriting images before the host
computer can retrieve them, the scanner will automatically pause the
feeder and will resume scanning when enough internal buffer memory
is free.
The Overrides screen allows you to temporarily override your scan job setup
for Multifeed Detection, Multifeed Sensors, Printing, Print Offset, Maximum
Document Length and Document Handling for the remainder of the scan job.
NOTE: Maximum Document Length is not available on the i5200V/i5600V
Scanners.
To access the overrides screen at the start of each scan job, the auto start
setting in the scanning application must be disabled. See the section entitled
"Scanning documents" earlier in this chapter for more information.
When you pause the scanner, the Overrides button is available on the
touchscreen.
To override a setting:
1. Touch Overrides on the Paused screen. The Overrides screen will be
displayed.
NOTE: Use the scroll bar to show all options.
2. Touch the option that you want to override, then touch Close to continue
scanning.
3-9