Optional; Table Of Needle Hole Guide; Silicon Oil Tank - JUKI AMS-221EN/IP-420 Instruction Manual

2. OPTIONAL

2-1. Table of Needle hole guide

Needle used
Sze Part No.
#09 to #11 B242621000C
#11 to #14 * B242621000A
1
#14 to #18 * B242621000B
2
B242621000D
#18 to #21
B242621000F
#22 to #25 B242621000G
#18 to #25 B242621000H
Needle used
Sze Part No.
#09 to #11
B1601210D0E (OP)
#11 to #14 * 40023632 (Standard)
1
B1601210D0FA (OP)
#14 to #18 *
2
#18 to #21 B1601210D0BA (OP)
#22 to #25
B1601210D0CA (OP)
#18 to #25
* : Standard nstalled needle (DP X 5 #14)
1
* : Standard nstalled needle (DP X 17 #18)
2
・ S type : Applcable count of thread : #80 to #20
・ H type : Applcable count of thread : #50 to #02
・ (OP) means the optonal.

2-2. Silicon oil tank

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
1
Needle hole gude
Needle hole dameter
ø 1.6
ø 1.6
ø 2.0
ø 2.4
ø 3.0
ø 3.0 (wth a counterbore)
ø 3.0 (eccentrc hole)
Intermedate presser
Sze (øA × øB × H × L)
ø 1.6 × ø 2.6 × 5.7 × 37.0
ø 2.2 × ø 3.6 × 5.7 × 38.5
ø 2.2 × ø 3.6 × 8.7 × 41.5
ø 2.7 × ø 4.1 × 5.7 × 38.5
ø 3.5 × ø 5.5 × 5.7 × 38.5
Fx slcon ol tank 1 (MAXAP30EX00) wth the
magnet.
2
– 116 –
Applcaton
For knts (OP)
For lght-weght to medum-weght materals
(S type)
For medum-weght to heavy-weght materals
(H type)
For heavy-weght materals (OP)
For extra heavy-weght materals (OP)
For heavy-weght materals to prevent skp-
sttchng (OP)
H
1. If the thread twists hard on silicon
oil tank base 2 (B2535210000),
reverse the direction of winding the
thread.
2. For fixing the silicon oil tank base,
use two M4 screws.
(Part No. of commendable screw :
SM4040855SP)
ø A
L
ø B