Table of Contents
Advertisement
Write Command Examples
Function
Command
Brightness
(BRT100)
Power
(PWR0)
Power
(PWR1)
Error Conditions
Not all commands are supported for all projectors. If an unsupported com-
mand is issued, the command will be ignored. If a command is received that
is not understood, a '?' character will be returned indicating the command
was not understood.
Limitations
The projector cannot respond to commands coming in at a high-rate. There-
fore, a delay must occur between commands to ensure that the command
gets properly executed.
The Step column refers to increasing or decreasing the menu bar position
since the On-screen Display is not an exact match of values. For example,
Step 2 changes the data by 2 through the CLI (Command Line Interface).
The menu bar is up (or down) by 1.
Response
Sets the brightness to 100
Turns power off
Turns power on
43
Com
Function
mand
Active Iris*
IRI
0: Off
1: Presentation
2: Film
AMX Device Discov-
AMX
ery Enable
0: Disable; 1: Enable
Aspect Ratio
ARZ
0: Auto
1: Native
2: 4:3
3: 16:9
6: 16:10
Aspect Ratio (Split
ARL
Screen left)
0: Auto
1: Native
2: 4:3
3: 16:9
6: 16:10
Aspect Ratio (Split
ARR
Screen right)
0: Auto
1: Native
2: 4:3
3: 16:9
6: 16:10
RW
Min
Max
Default
RW
0
2
1
RW
0
1
0
RW
0
6
0
RW
0
6
0
RW
0
6
0
Step
1
1
1
1
1
Advertisement
Table of Contents
