Adjusting The Image - InFocus IN5100 series User Manual

Adjusting the image

Adjust the height of the projector, if necessary, by pressing the release but-
tons on each side of the projector's front to extend the elevator feet.
Position the projector the desired distance from the screen at a 90 degree
angle (perpendicular) to the screen.
See page 41 for a table listing screen sizes and distances.
Adjust the zoom by rotating the Zoom ring inside the lens door until the
desired image size is produced.
Adjust the focus by rotating the Focus ring on the lens until the desired
focus is produced.
If the image is not on the screen or viewing area, adjust it by using the lens
shift dials inside the lens door.
Use the right dial to shift the lens left or right. Use the left dial to shift the
lens up or down.
Adjust the Contrast or Brightness in the Picture menu.
See page 27 for help with the menus.
adjust height
release
button
elevator
foot
adjust distance
adjust zoom and focus
adjust lens shift
adjust Contrast or Brightness
11
release
button
elevator
foot
contrast
brightness