Table of Contents
Advertisement
Presets: Presets are provided that optimize the projector for displaying com-
puter presentations and video images in different lighting conditions and
on different backgrounds.
There are also user-definable presets. To set a preset for the current source,
Save Settings
adjust the image, select Save Settings in the Presets menu, then select Save
User Presets 1 (or 2 or 3). You can recall these settings in the future by select-
ing the User 1 preset. If you select User Presets then further adjust the
image, Presets Off will automatically be selected in the Preset menu to indi-
cate changes have been made.
To restore the factory default settings, choose Factory Reset in the Set-
Presets
tings>Service menu.
Advanced settings
Sharpness: changes the clarity of the edges of a video image. Select a sharp-
ness setting.
Color Space: This option applies to computer and component video sources
(except 480i/576i). It allows you to select a color space that has been specifi-
cally tuned for the input signal. When Auto is selected, the projector auto-
Sharpness
matically determines the standard. To choose a different setting, turn off
Auto, then choose RGB for computer sources, RGB Video for HDMI com-
Advanced
puter sources, and either REC709 or REC601 for component video sources.
Color Temperature: changes the intensity of the colors. Select a listed value,
or select User and individually adjust the intensity of the red, green, and
blue colors.
Color Space
Color Temperature
29
Advertisement
Table of Contents
