Locator Led And Button; Gigabit Ethernet Card Lan Ports (Core I/O); Figure 2-9 Core I/O Lan Port Leds - HP Integrity rx4640 User's & Service Manual

Controls, Ports, and LEDs
Rear Panel Controls, Ports, and LEDs
For troubleshooting information regarding the iLO MP LAN LEDs, see "iLO MP LAN Port
NOTE
Link/Activity LED Display" on page 123.

Locator LED and Button

An LED and button is provided on the rear panel of the server. Another single blue LED and button is on the
front control panel that enables/disables the locator function. See Figure 2-8 for the location of the locator
button.

Gigabit Ethernet Card LAN Ports (Core I/O)

The 2-Port core I/O Gigabit ethernet card uses two RJ-45 LAN connectors. These connectors have no LEDs.
Figure 2-9 shows the two core I/O LAN ports.
Figure 2-9 Core I/O LAN Port LEDs
30
RJ-45 Connectors
Chapter 2