Software
resolution
Quick installation and setup overview
Install the HP UPS Management Module in the UPS
1.
page 18).
Install and configure the HP Power Protection Agents to communicate with the management module
2.
("Installing the HP UPS Power Protection
Access the HP UPS Management Module web interface
3.
Sign in to the web interface
4.
Add the HP Power Protection Agents to the web interface using the Add / Edit Attached Device
5.
screen (on page 71).
Configure the power fail settings for each agent using the Power Fail screen
6.
page 73).
(optional) Configure additional settings using the menus on the Setup tab (on page 58).
7.
Browser
high color (maximize browser window for optimal
display)
("Signing in to the web
("Installing the HP UPS Management
Agent" on page 26).
("Accessing the web
interface" on page 43).
Module" on
interface" on page 42).
("Power Fail
menu" on
Overview 16