Optional power monitoring using SNMP
SNMP monitoring
Battery status, power status, events, and traps can be monitored using third-party SNMP managers.
SNMP monitoring supports the RFC-1628 MIB and the HP Power MIB (CPQPOWER.MIB).
Using the SNMP submenu (on page 86):
Configure the third-party SNMP manager to monitor the HP UPS Management Module.
1.
In the third-party SNMP manager, configure the HP UPS Management Module information to be
2.
monitor by the SNMP manager.
The HP Power MIB (CPQPOWER.MIB) can be downloaded from the HP website
(http://www.hp.com/go/rackandpower).
Optional power monitoring using SNMP 116