Hp Ups Management Module Web Interface; Hp Ups Management Module Web Interface Overview; Accessing The Web Interface; Web Browser - HP UPS User Manual

HP UPS Management Module web interface

HP UPS Management Module web interface
overview
The web interface graphically displays various measurements and warning and alarm messages from the
management module. Also, system values and power fail settings can be configured through the web
interface and sent to the management module.
NOTE:
Management Module web interface are available using the HP UPS Management Module
Service Menu (on page 82).

Accessing the web interface

You can access the web interface:
•
Remotely through a Web browser (on page 42)
•
Locally from the system tray icon (on page 43) in Windows®

Web browser

Use a web browser to access the HP UPS Management Module web interface:
If necessary, configure the management module by:
1.
Launching a terminal emulation program (on page 21).
a.
Configuring the management module for remote access (on page 22).
b.
Be sure that you have connected the network cable
2.
the management module.
Press the Reset button on the management module front panel. The management module discovers
3.
attached UPSs.
Launch a supported browser. The browser window appears.
4.
In the Address field (Microsoft® Internet Explorer) or the Location field (Mozilla and Firefox), enter:
5.
http://xxx.xxx.xxx.xxx
-or-
https://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IPv4 or IPv6 address. The log in screen appears.
Sign in through the web browser
6.
NOTE:
page 15)."
All status information and configuration parameters included on the HP UPS
("Signing in to the web
For a complete list of the browser requirements, see "Web interface requirements (on
("Connecting the network
interface" on page 43).
HP UPS Management Module web interface 42
cable" on page 20) to