Use the operation buttons
FLASH LIGHT
WATER LEVEL
SPEEDY
The washing machine can detect the
laundries automatically during After
detection, it will set the water level to
suitable value among 24L 32L 40L 46L
automatically.during the STANDARD
program.
You can also set water level by yourself.
After the machine is started, it will not set
water level automatically. You shall push
the start/pause button to make new setting.
If there's water inside the tub, the machine
cannot detect the laundries and will display
water level 32L.If wet laundries are put in,
it may display water level 46L. You must
set suitable water level by yourself.
If quick program is selected, it will display
water level 20L.
If tub dry program is selected, the water
level will not respond
During operation of wash and rinse
program, you can push down the water
level button to add water. When you
release the button, or it reaches the
overflow water level, the machine will stop
adding water.
The water level decided may be different
from actual value because of the different
moisture level of the laundries.
The delay time can be increased or decreased while the wash time, spin time and rinse times can't be adjusted(wash time,
spin time and rinse times can only be default value or zero) with "wool fabric" program; the "
button and " ", "
" buttons are invalid with "
Complete the self-programming and start the machine with the "Memory" program, the machine can memory this
self-programming next time when choosing the "Memory" program again. The time can be continuous increased or
decreased with long pressing on " ", " " buttons with self-programming
The delay indicators are flashing when the delay program is under way. Press "
delay status
SOAK
REMAIN(MINUTES)
WASH
RINSE
SPIN
PROCESS
MY
Program
MEMORY
STANDARD
WOOL
TUB DRY
FAVOURITE Washing the normal laundries
HEAVY
DELICATE
SPEEDY
Press the "
when the corresponding indicator is flashing. Press the " ", " " buttons to
adjust the functional parameters which are corresponding to the flashing
indicators:
Press"
PROGRAM
That the values of time or times are zero means the function corresponding
to the flashing indicator is cancelled during the adjustment.
TUB DRY
HOLD
MEMORY
STANDARD
WOOL
DELAY TIME
TUB DRY
PROGRAM
Applicable situation
The commom wash,the washing machine will set to
MEMORY program including
last time
Common washing
If "STANDARD" program is set, the machine will execute
fuzzy detection. The computer will set the water level an
wash time as per the cloth and quantity of the laundries.
The whole procedure is under automatic control
Washing the woollen textiles
Drying the inner tub and the outer tub,which can avoid
growing mildew
Washing the bigger and heavier laundries
Washing the woollen textiles or underwear
Washing the laundries with small quantity and light soil
MY PROGRAM
" button and the process is self-programming
MY
Adjustable
"times
process
once
delay
twice
soak
three times
wash
four times
rinse
five times
spin
Confirm the above set up (The process indicators
six times
are always on whose values about time or times
are not zero)
" program
MY PROGRAM
FAVOURITE
HEAVY
DELICATE
POWER
SPEEDY
START/HOLD
PROGRAM
"
wash,rinse,spin"automatically
Press " ", " "
Display content
buttons to adjust
Delay indicator flashing
Soak indicator flashing
Wash indicator flashing
Rinse indicator flashing
Spin indicator flashing
MY PROGRAM
" button to display
d
Delay time
Soak time
Wash time
Rinse times
Spin time
"
11
Need help?
Do you have a question about the HWM60-Z918 and is the answer not in the manual?