Use The Operation Buttons - Haier HWM70-9288 User Manual

Use the operation buttons

Off
On: indicate the program about to run,or indicate
the selected mode or indicate the water level
Flashing: indicate the running program
It displays "--" during detecting.

It displays total remained time during the

running program (min).
It displays remained reserved time during

reserve program hour
It displays abnormal symbol in abnormal

situation.(See to Page 14)
When push The "Process" Button Can choose

one or several process for soak, wash, rinse
and spin
The process button is unavailable for the

"Tub Dry" and "Speedy" program
Sock function is unavailable during "Wool"

program
The washing machine can detect the

laundries automatically during the
STANDARD program. After detection,
it will set the water level to suitable value
among 35L,44L and 51L automatically.
The water level decided may be different

from actual value because of the different
moisture level of the laundries.
You can also set water level by yourself.

After the machine is started, it will not set
water level automatically. You shall push
the start/hold button to make new setting.
If there's water inside the tub, the machine

cannot detect the laundries and will display
water level 35L .If wet laundries are put in,
it may display water level 51L. You must
set suitable water level by yourself.
If quick program is selected, it will display

water level 24L.
If tub dry program is selected, the water

level will not respond.
During operation of wash and rinse

program, you can push down the water
level button to add water. When you
release the button, or it reaches the
overfl ow water level, the machine will stop
adding water.
The rinsing water level is one water level

higher than the washing water level( except
the maximal and man-rated water level).
Push the
 POWER
power.
When the power is on, push it again to

switch off the power.

Push the
POWER
the power.If the
not pushed, the washing machine will
automatically switch off the power
after 5 minutes.
After the power is switched on,press it to start
the machine.
During working, push it to pause.

During pause, push this button to restart

and go on working
FLASH LIGHT
REMAIN(MINUTES)
SOAK
WASH
RINSE
SPIN
DELAY TIME
MY
WATER
PROCESS
LEVEL PROGRAM
PROGRAM Applicable situation
This function allows frequently used
MEMORY
functions (Wash, Rinse, Spin) to be
memorized so that they can be easily used
when needed.
FAVOURITE
Default setting for washing process
Common washing
If "STANDARD" program is set, the
machine will execute fuzzy detection. The
STANDARD
computer will set the water level and
STANDAR
washing time as per the cloth and quantity
of the laundries.The whole procedure is
under automatic control.
HEAVY
Washing the relatively big and thick
laundries
For washing wool fabrics
WOOL
Gentle washing for laundries
DELICATE
Drying the inner tub and the outer tub,
TUB DRY
which can avoid growing mildew.
Quick wash of the laundry under 2.0
SPEEDY
with light soil.
The water level will automatically set 24L.
button to switch on the
button to switch on
button is
START/HOLD
POWER
MEMORY FAVOURITE
START/HOLD
HEAVY
STANDARD
WOOL DELICATE
TUB DRY
SPEEDY
PROGRAM
kg
11