Specification - Haier HWM60-Z918 User Manual

P h e n o m e n a
The spinning is intermittent when it starts.
Push the "spin" button to select "Spin", but it doesn't
work.
The fi nal spinning is fi nished, it becomes rinsing and
begins to inlet water.
When the power plug is inserted,computer board
indicator is switched on, and the machine starts
working.
Specifi cation
Rated voltage/Frequency
Water level / Water quantity (about) 1/12L, 2/16L, 3/20L, 4/24L, 5/28L, 6/32L, 7/36L,8/40L,9/43L,10/46L
Injection pressure
Washing/Spinning capacity
E x p
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is
needed before it starts spinning.
Because the washing clothes lean to one side,the
safety switch acts.After water fi lling and running,
eliminating the eccentricity of washing clothes,then
beginning to spin.
It is the special resume function. In the case of power
failure or the power plug is loose during washing, the
machine can save the running program, and resume
the program afterthe power supply is recobered. You
do not need to set the program again
220-240V ~ /50Hz
0.03 MPa ~ 1.0 MPa
6.0kg/6.0kg
a l n t a o i n
15