Connection Between The Water Inlet Hose And The Washer - Haier HWM60-Z918 User Manual

Fully automatic washing machine
Table of Contents

Advertisement

Connection between the water inlet hose and the washer

1.Do not take off the water absorption cushion. Please
check if the cushion is dropped or damaged before
each usage. If it happens please contact our
after-sale department immediately.
2.Put the nut of the water inlet hose on the valve
jointer.
3.Fasten the nut. Swing it gently to confirm if it's
suitable.
Connection between the jointer of the water inlet hose and the
water inlet hose
Push down the slider. Insert the water inlet hose
1.
into the jointer.
Hang the lock lever to the jointer. Release the
2.
slider till a click sound is heard.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection between
the jointer of the water inlet hose and the water faucet, and
the installation of the water inlet hose are firm, so as to
prevent dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider.Then pull off the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept
on the faucet to prevent damaging the fixing screw.
nut of the water
inlet hose
water absorption
jointer of the
cushion
water inlet valve
Locking lever
The jointer of the
water inlet hose
Slider
Locking lever
Slider
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents