HWM70-10A Computerized Full-auto Washing Machine Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety. The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual.
Names of the parts Honourable users: Thank you for choosing our products. Our products intergrade high-tech,precision,frontier science. To facilitate using it,please read this manual carefully and operate this machine according to it. Top lid Scour container Control panel Inner tub Control panel film Pulsator Cabinet...
Safety precautions Please plug the power plug on special receptacle. Be sure to use three-pins power receptacle. Ensure that the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Earth Do not bend, stretch, twist, bind the power cord by force, or reform it.
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine The handicapped or children without care shall not use the machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items (like the towel cloth, blanket, etc.).
How to change the direction of the drain hose 1.Dismantle the rear cover of the washing machine. 2.Lean the machine down gently with the front surface facing the ground. Loosen the eight screws by a cross screwdriver. Back Bottom Front Soft item 3.Put down the drain hose.
Install the water inlet hose Install the water inlet hose Confirm the water faucet water faucet, suitable water faucet, suitable The exit end face of the faucet The exit end face of the faucet It is required that the front end shall be longer than 10cm. It is required that the front end shall be longer than 10mm.
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
1 Preparation before washing Pay attention to followings before washing the laundries Check C l e a r t h e the laundries pocket. Take has special out the coins, requirement sand, hairpins on washing etc. a. Check if the laundries are applicable for washing with machine. b.
2 Put in the laundries Reference weight of the laundries: working suit up,down cotton,about 1120g blanket cotton,about 900g pajamas about 200g Shirt cotton,about 300g undershirt cotton,about 180g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time.
3 Put in the detergent and softener Powder detergent entrance close open Detergent container How to use the whitener Fill water to decided level .Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with colour or pattern as they are prone to lose colour.
4.Push the operating button Function of operating buttons State and signification of indicator light The frame of indicator is not lighted. the frame of the indicator is flashing : indicate the running program. the frame of the indicator is on : indicate the program about to run, or indicate the selected mode the frame of the indicator is flashing rapidly: indicate abnormal condition.
START/PAUSE button After the power is switched on, push it to start the machine During working, push it to pause working. During pause, push it to resume working. one or more programs among soak wash rinse spin can be selected. Pushing PARAMETER SETUP button, times of soak, wash, rinse or spin can be selected.
Steps of using the operation buttons and description of the steps Push the POWER ON/OFF button to switch on the power. Push the PROGRAM button to select the suitable automatic program. After switching on the power, the machine will set to standard program automatically. To select other program, push the Program button till the corresponding indicator is on.
NOTES The machine will begin to spin for a period of time even though there is no water in inner tub. Do not select Soak program when washing haircloth. Take apart the clothings depigmenting easily from others. If the affusion can not reach the scheduled water level, the pulsator does not work. Selection method of the procedure programs Times of pushing Selected procedure...
Time list of each program SOAK WATER PROGRAM LEVEL (MIN) about15~25 NORMAL about20~30 JEANS GENTLE QUICK * Total time: including the normal water filling time, drain time.The water level and pressure of water filling will affect the finishing time. * Spin time: the time from intermittent running to finishing. *If the SOAK program is selected, the machine will set the washing program of SOAK, WASH, RINSE and SPIN.
Example of self-programme function Push the POWER ON/OFF button to switch on the power. Push the PROGRAM button to select the suitable automatic program. After switching on the power, the machine will set to standard program automatically. This example will be according to the standard program Push PROCESS button to select suitable procedure After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically.
Push the PARAMETER SETUP to set up the parameter of each program Pushing PARAMETER SETUP button, the machine turn into programme function, where we assume that you set up the spinning time 6 min. When the WASH light blinks, push PROCESS button until the SPIN light blinks, and then push the PARAMETER SETUP button until 6 is displayed on the digital tube.
5 Close the top lid If we open the top lid during the working state, the machine will stop working 6 Finish washing When the wash finishing, the power will be switched off automatically. 7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
Trouble-shootingAnswers to questions Trouble-shootingAnswers to questions Trouble-shootingAnswers to questions Trouble-shootingAnswers to questions (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
Specification Type Rated voltage and frequency WATER LEVEL/QUANTITY (about) Large consumption of water Rated washing capacity Rated spinning capacity Rated washing input power Rated spinning input power Affusion hydraulic pressure Weight Dimension (mm) XQB70-10 A 220V-240V 50Hz 1/15L 2/20L 3/25L 4/28L 5/32L 6/36L 7/41L 8/43L 9/46L 10/49L 11/52L 12/56L About 168L( standard program with high water level) 7.0kg...