Related Manuals for Haier HWM60-728
Summary of Contents for Haier HWM60-728
- Page 1 User's manual Fully automatic washing machine This manual is for HWM60-728 Please read this manual carefully before using. 0030808120 Retain it for future reference.
-
Page 2: Table Of Contents
Contents Names of the parts Meaning and description of the symbols Safety precautions Installation and adjustment Preparation before washing Put in the laundries Usage of the detergent Use the operation buttons Close the top lid Finish washing Disposal after washing Trouble shooting Answer to question Packing list Specification... -
Page 3: Names Of The Parts
Names of the par ts Top lid component Control panel seat Lint filter Filter cover Liquid whitener inlet Inner tub Pulsator Control panel film Cabinet Adjustable foot Notes: All illustrations in this Manual are given for reference only. Your products and accessories may show differences from these illustrations due to our continuous improvement. -
Page 4: Safety Precautions
Safety precautions Please plug the power plug on special 220V/10A receptacle. Be sure to use single-phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Earth Do not damage the power cord,bend,extend,twist,bind or alter it by force.Do not press or nip it with weight.If the power cord or the power plug is bad,or the power plug becomes flexible,to avoid risk it is required to have it replaced by the technicians of... - Page 5 To change the direction of drain pipe, please contact the customer care agent of our company. Please don t use the washer in the environment below 0 ; if the washer has been stored below 0 , please be sure to ensure the washer is placed under the room temperature for 2 4 hours and then use otherwise the washing effects may be lowered or the washer may be damaged.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth,blanket, etc.). -
Page 7: Usage Of The Drain Hose
How to change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Take off the drain hose frame. Put down the drain hose , put the drain hose into the cabinet, take off the drain hose bushing (As indicated in Figure 1). -
Page 8: Install The Water Inlet Hose
Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. - Page 9 Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
-
Page 10: Preparation Before Washing
Preparation before washing Pay attention to followings before washing the laundries Confirm if Clear the there is spe- pocket. Take cial require- out the coins, ment for the sand, hairpins laundries. etc. a. Check if the laundries are applicable for washing with machine. b. -
Page 11: Put In The Laundries
Put in the laundries Usage of the detergent Washing powder box Access for detergent How to use the whitener Fill water to decided level .Dilute the whitener with container. Pour it slowly into the liquid whitener inlet. Avoid using whitener on laundries with colour or pattern as they are prone to lose colour. -
Page 12: Use The Operation Buttons
Use the operation buttons RESERVE(HOURS) STANDARD SOAK WASH RINSE SPIN PROCESS Mode and meaning of the indicators The light is off Flashing: indicate the running process On: indicate the process about to run, or indicate the selected program or indicate the water level A POWER ON/OFF"button "... -
Page 13: Water Level Button
C "PROCESS" button You can choose one or more processes among soak, wash, rinse and spin. The button is invalid if you choose PROCESS You can not choose soak process if you choose D WATER LEVEL button " When the standard program is selected, the washing machine can detect the laundries automatically. - Page 14 Steps of using the operation buttons and description of each step RESERVE(HOURS) STANDARD SOAK WASH RINSE SPIN PROCESS 1.Push the "POWER ON/OFF " button to switch on the power It has the special power resume function. In the case of power failure or the power plug is loose during running , the machine can save the running program, and resume the program after the power supply is recovered.
- Page 15 ATTENTION Even there's no water in the tub, the spinning will start Attention after a certain period. Wash and spin after putting the damageable clothes into tuck net, to avoid scathe. Wash the laundries that are prone to lose colors separately from other laundries.
-
Page 16: Close The Top Lid
4.Push the " WATER LEVEL "button, select suitable water level After switching on the power, when select the standard program, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically. -
Page 17: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box with water. The method of dismantlement and installation refer to the usage of the lint filter. -
Page 18: Trouble Shooting Answer To Question
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the specialmaintenance department or after-sale service department of our company. -
Page 19: Packing List
Packing list Name User's manual Warranty card Components of the water inlet hose Bottom plate Tapping screws Fully automatic washing machine Specification Water level/Water quantity(about) Water inlet pressure Rated washing/spinning capacity Quantity One piece One piece One piece One piece (Between the upper cushion of the washing mechine package and the upper seal of the package carton)
Need help?
Do you have a question about the HWM60-728 and is the answer not in the manual?
Questions and answers