Bearing Mode; Cursor Reference - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

4-4
Table 4-1: System Set Up Parameters (Continued)
Menu
NMEA-OUT
SET UP
CURSOR ECHO
DATE FORMAT
TIME FORMAT
TIME OFFSET
GPS SOURCE
GPS SOG/COG
FILTER
NMEA INPUT
LANGUAGE
SIMULATOR

Bearing Mode

This is the mode (magnetic or true) of all the bearing and heading data
displayed as indicated in the status bar.

Cursor Reference

The mode of the bearing data displayed for the cursor readout. The
bearing information can be displayed in either of two forms:
•
•
Options
OFF or ON
(for each sentence)
RADAR CURSOR IN - OFF/ON
CHART CURSOR IN - OFF/ON
SEATALK CURSOR OUT - OFF/ON
DD/MM/YY
MM/DD/YY
12 HOUR
24 HOUR
UTC, or local offset value:
Plus or minus up to 13 hours, in
whole hours
MASTER or REPEATER
HIGH, MEDIUM or LOW
NMEA or RTCM
English (UK),
English (US),
Danish, French, German,
Dutch, Icelandic, Italian,
Norwegian, Portuguese,
Spanish, Swedish, Finnish
OFF or ON
Relative: The bearing relative to your vessel's heading.
Mag/True: The actual bearing in either degrees magnetic or degrees
true. This option is only available if you have heading data from a
compass.
If you choose this mode, the selection you made for the previous
parameter (Bearing Mode), °M or °T, is displayed in the cursor
Raynav 300 GPS Plotter
Factory New
Default Default
ON
(all)
OFF
OFF
OFF
MM/DD/YY
12 HOUR
UTC
MASTER
MEDIUM
NMEA
English (US)
OFF