Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual page 57

Chapter 3: Operation
WPT POSITION
01
02
TIME: 14:03:39
ETA HOURS
3. Use the soft keys to toggle between ETA or HOURS (elapsed) time and
➤
To change the SOG used for ETA calculations:
1. Press the PLANNED SOG soft key to switch to PLANNED SOG.
2. Press the up or down PLANNED SOG arrow soft keys to increment/dec-
3. Press the ACTUAL SOG key to use the actual SOG value rather than a
4. Press CLEAR to remove the Route Information window, then CLEAR
5. To return to the default soft key display, press CLEAR.
INFO FOR ROUTE - NEW ROUTE
50°50^00N
001°06^00W
50°51^00N
001°07^00W
ACTUAL
TIME SOG
4.5kts
Figure 3-34: Route Information Screen
to change the Speed Over Ground (SOG) value used in the time cal-
culations. The current selections are highlighted.
rement the planned SOG value.
The Time values in the Route Information list are updated.
planned one.
again to return to the route soft keys.
BRG DISTANCE TOTAL TIME
°T nm
--- 0.0
239 4.8
DATE: 10/29/2001
PLANNED SOG
6.1kts
nm ETA
0.0 0:00
4.8 0:20
D4930-3
3-29