Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual page 50

3-22
➤
To edit an item in a list using the Navigator Keypad:
1. If necessary, use the right and left arrow keys to move the cursor to the
2. Press an alphanumeric key until the desired character is displayed.
1. Use the up and down arrow keys to scroll through the list of alpha,
2. Use the arrow keys and alphanumeric keys to input the remainder of
3. When done, press the ins key to enter your changes.
desired character position.
Each time you press one of these keys in succession, the next charac-
ter on that key is input.
or
numericand special characters until the desired character is displayed
(just as you would with the trackpad). Note that you must use this
method to input special characters; they are not available using the
alphanumeric keys.
Use the del key to insert a space, if required.
the characters required to complete the editing.
Raynav 300 GPS Plotter