Plotter Set Up Parameters; Chart Orientation - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

Chapter 4: Setting Up the GPS Plotter

4.4 Plotter Set Up Parameters

The PLOTTER SET UP option allows you to set up the Plotter according to
your system configuration and your personal preferences.
The following table lists the Plotter Set up parameters and their options,
shows the factory default setting and provides a space for you to make a
note of your new default setting. Each parameter is described in the
following subsections.
Table 4-2: Plotter Set Up Parameters
Parameter
CUSTOMISE PLOTTER

CHART ORIENTATION

WAYPOINT SYMBOLS
WAYPOINT NUMBERS
DEFAULT WAYPOINT
SYMBOL
HEADING VECTOR
COG VECTOR
TIDE VECTOR
DATUM SELECTION
POSITION OFFSET
SETUP
Chart Orientation
The plotter orientation is normally North Up, but can be changed to
Course Up or Head Up if heading data is available. The orientation
modes give the following displays:
Options
See below for
details
NORTH UP
COURSE UP
HEAD UP
OFF
ON POINTS
ON ALL
OFF
ON
Fish, skull,
X or anchor symbol
OFF, 3 MINS,
10 MINS
INFINITE
OFF, 3 MINS,
10 MINS
INFINITE
OFF, 10 MINS, 1
HOUR
INFINITE
WGS 84, LOCAL
OFF
ON
Factory New
Default Default
NORTH UP
ON ALL
ON
X
OFF
OFF
OFF
WGS 84
OFF
4-9