Availability Of The Waas System In North America; Extended Offshore Coverage - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

Table of Contents

Advertisement

iv

Availability of the WAAS System in North America

Extended Offshore Coverage

Figure i: The WAAS System
The WAAS system is presently broadcasting and being tested for
aviation use. It is expected to be certified by the FAA in 2002. During
this testing and certification period, continuous service is expected;
however, brief signal outages may occur as refinements and upgrades
are made to the system. The status of WAAS and planned outages are
available on-line at the following websites:
http://wwws.raytheontands.com/waas
or
http://www.raymarine.com
Your unit is shipped from the factory in normal GPS mode. For
improved accuracy provided by the WAAS system, you need to
enable the WAAS capability of your unit.
To enable WAAS:
1. Press the MENU key
2. Press GPS SETUP soft key
3. Press FIX MODE soft key to select SD mode.
Using two GEO satellites, WAAS provides augmented differential
GPS coverage for most of North America. Since the WAAS
differential messages are broadcast by GEO satellites, the WAAS
signals cover a greater area both inland and offshore in comparison
with land based DGPS systems. Coverage for North America is
shown in Figure ii.
Raynav 300 GPS Plotter
4903-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents