Clearing The Current Track - Raymarine Raynav 300 GPS Plotter Owner's Handbook Manual

Chapter 3: Operation
Note: Track points are not 'wasted' when the vessel is stationary as there
is a minimum distance separation, even when using a time interval set-
ting.
➤
To set up a track:
1. From the plotter display, press the MENU key to display the set up soft
SYSTEM
SET UP¬
2. Press the TRACK SETUP soft key to display the first level Track soft
TRACK
OFF
3. Press the MORE... soft key to display the second level Track soft keys
4. Press the appropriate TRACK INTERVAL up/down soft key to set an
5. Press MORE to return to the first level Track soft keys.
6. Press the TRACK OFF ON soft key to toggle tracks on/off.
7. To return to the default soft key display, press CLEAR.

Clearing the Current Track

You can clear the current track from the screen. When you select CLEAR
TRACK, if the current track has not been saved, you have the option of
saving it.
➤
To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved, the SAVE TRACK soft keys are dis-
keys as shown in Figure 3-42.
CHART
SET UP¬
Figure 3-42: Set Up Soft Keys
keys as shown in Figure 3-43:
CLEAR
ON TRACK
Figure 3-43: First Level Track Soft Keys
as shown in Figure 3-44.
TRACK INTERVAL
1S
Figure 3-44: Second Level Track Soft Keys
appropriate TIME or DISTANCE interval.
Your vessel's trail will be displayed on-screen, with a line joining the
points at the selected interval.
played.
TRACK
SET UP¬ SET UP¬
MAKE INTO
ROUTE
TRACK
LIST MORE¬
GPS
D4918-1
MORE...
D4919_1
D4920-1
3-43