Memory Population Rules - Fujitsu MS-6191 User Manual

Mainboard MS-6191
3. The plastic clip at the side of the DIMM slot will automatically close.

2.3-3 Memory Population Rules

1. Supports only PC100 SDRAM DIMM.
2. To operate properly, at least one 168-pin DIMM module must be
installed.
3. This mainboard supports Table Free memory, so memory can be
installed on DIMM1 or DIMM 2 in any order.
4. Supports 3.3 volt DIMM.
5. The DRAM addressing and the size supported by the mainboard is
shown below:
Table 2.3-1 SDRAM Memory Addressing
DRAM DRAM
Tech. Density &
Width
16M 1Mx16
2Mx8
64M 2Mx32
2Mx32
4Mx16
4Mx16
8Mx8
64M 2Mx32
4Mx16
8Mx8
DRAM Address Size
Addressing
Row
ASYM 11
ASYM 11
ASYM 11
ASYM 12
ASYM 11
ASYM 13
ASYM 13
ASYM 12
ASYM 13
ASYM 13
15
MB / DIMM
Column Single no.
Side(S) pcs.
8 8MBx4
9 16MBx8
9 32MBx2
8 16MBx2
10 32MB
8 32MB
9 64MB
8 16MB
8 32MB
9 64MB
Double no.
Side(D) pcs.
16MBx8
32MBx16
64MBx4
32MBx4
64MB
64MB
128MB
32MB
64MB
128MB